Water-miscible metalworking fluids for machining

Water-miscible metalworking fluids are metalworking fluids (MWF) that are mixed with water before use. Oemeta's water-miscible metalworking fluids are usually supplied as a concentrate and are then mixed directly on site at your machine tool. We offer you a comprehensive range of water-miscible metalworking fluids.


What is special about water-miscible metalworking fluids?

As a lot of heat is generated during a machining process, it must be absorbed and dissipated quickly. This is where the strength of water-miscible metalworking fluids comes into play: as the water-miscible MWF consists of approx. 95% water, a much greater amount of energy can be absorbed than with a non-water-miscible MWF due to the high heat capacity of water. In addition, more energy is extracted from the system when the water evaporates (heat of evaporation) and this is also dissipated more quickly (thermal conductivity).

What are the advantages of water-miscible metalworking fluids?

Water-miscible MWF from Oemeta are characterized by particularly high performance. Our innovative emulsifier packages simply separate tramp oil on the surface of the metalworking fluid. This makes it even easier to remove tramp oil and keeps the MWF clean and efficient.

Our water-miscible MWF also impress with their low consumption. For example, a comparison of NOVAMET 920 with a conventional MWF showed a demonstrable reduction in consumption of over 20 %.

Many of our water-miscible MWF also offer improved occupational safety. The good skin compatibility of some products has been proven by BUS/TEWL tests.

At a glance:

  • High lubricating performance thanks to state-of-the-art additive technologies
  • Low consumption due to good flow behavior
  • Clean machines and components thanks to high washing activity
  • High human compatibility

What types of water-miscible metalworking fluids are there?

Water-miscible metalworking fluids are divided into water-soluble and emulsifiable metalworking fluids.

Water-soluble metalworking fluids

Water-soluble metalworking fluids form a solution when mixed with water - these MWF therefore dissolve completely in water.

Emulsifiable metalworking fluids

When mixed with water, emulsifiable metalworking fluids form an oil-in-water emulsion, which typically has a milky appearance.

Our range of water-miscible metalworking fluids

With our product finder you can select the desired parameters and immediately receive the right solution.

Can't find what you're looking for?
For individual inquiries or further information, please contact us at:
infouk@oemeta.com / 01295 713 280 / Contact form

Reset Product Finder
0 products found

ESTRAMET 575 MG

Water-miscible metalworking fluids
ESTRAMET 575 MG is a high performance product with high versatility, based on synthetic ester oils. It particularly meets the special requirements of the magnesium machining.
Compatible materials:
Magnesium
Applications:
Drilling
Turning
Milling
Learn more

ESTRAMET S 95

Water-miscible metalworking fluids
ESTRAMET S 95 is a mineral oil-free high-performance product based on synthetic ester oils.
Compatible materials:
Aluminium
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Honing
Broaching
Reaming
Grinding
Deep Drilling
Learn more

NOVAMET 900 C

Water-miscible metalworking fluids
NOVAMET 900 C is an all-purpose product suitable for machining of ferrous and non-ferrous metals.
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Grinding
Learn more

NOVAMET 931

Water-miscible metalworking fluids
NOVAMET 931 is a boron-free high-performance product for demanding machining
Compatible materials:
Aluminium
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Reaming
Deep Drilling
Learn more

NOVAMET 1000 Y

Water-miscible metalworking fluids
NOVAMET 1000Y is a high-performance cooling lubricant based on mineral oil, specially developed for light to medium machining of non-ferrous metals.
Compatible materials:
Non-ferrous metals
Steel
Applications:
Drilling
Turning
Milling
Tapping
Deep Drilling
Learn more

NOVAMET 110

Water-miscible metalworking fluids
NOVAMET 110 is an all-purpose product used for machining and forming of ferrous and non-ferrous metals. The performance of the product is such that it can also be used on hard to machine materials.
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

NOVAMET 760

Water-miscible metalworking fluids
NOVAMET 760 is a special product for the aerospace industry with an excellent material compatibility, especially recommended for the machining of sensitive materials. The product features very good lubricating performance and low consumption in a broad application area and even in demanding processes.
Compatible materials:
Aluminium
Non-ferrous metals
Stainless Steel
Titanium
Applications:
Drilling
Turning
Milling
Broaching
Reaming
Deep Drilling
Learn more

NOVAMET 760 B

Water-miscible metalworking fluids
NOVAMET 760 B is particularly suitable for the machining of sensitive materials such as high-alloyed aluminium.
Compatible materials:
Aluminium
Stainless Steel
Titanium
Applications:
Drilling
Turning
Milling
Tapping
Reaming
Grinding
Deep Drilling
Learn more

NOVAMET 875

Water-miscible metalworking fluids
NOVAMET 875 is an all-purpose product primary suitable for the machining of steel and aluminium alloys. The product features high performance and low consumption in a broad application area.
Compatible materials:
Aluminium
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

NOVAMET 900

Water-miscible metalworking fluids
NOVAMET 900 is an all-purpose product suitable for machining of ferrous and non-ferrous metals. The product features high performance and low consumption in a broad application area and even in demanding processes.
Compatible materials:
Aluminium
Grey Cast Iron
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

NOVAMET 900 A

Water-miscible metalworking fluids
NOVAMET 900 A is an all-purpose product suitable for machining of ferrous and non-ferrous metals. The product features high performance and low consumption in a broad application area and even in demanding processes.
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

NOVAMET 900 B

Water-miscible metalworking fluids
NOVAMET 900 B is an all-purpose product suitable for machining of ferrous and non-ferrous metals. The product features high performance and low consumption in a broad application area and even in demanding processes.
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

NOVAMET 910

Water-miscible metalworking fluids
NOVAMET 910 is an all-purpose product for the machining of ferrous and non-ferrous metals. The product features high performance and low consumption in a broad application area.
Compatible materials:
Aluminium
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Broaching
Reaming
Grinding
Deep Drilling
Learn more

NOVAMET 910 B

Water-miscible metalworking fluids
NOVAMET 910 B is an all-purpose product for the machining of ferrous and non-ferrous metals. The product features high performance and low consumption in a broad application area.
Compatible materials:
Aluminium
Stainless Steel
Steel
Titanium
Applications:
Drilling
Turning
Milling
Broaching
Reaming
Grinding
Deep Drilling
Learn more

NOVAMET 920

Water-miscible metalworking fluids
NOVAMET 920 is a boron- and biocide free product for standard machining processes. The product features high performance and high material compatibility at low consumption.
Compatible materials:
Aluminium
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Reaming
Deep Drilling
Learn more

UNIMET 183

Water-miscible metalworking fluids
UNIMET 183 is a bactericide-free, robust and economical cooling lubricant for light to medium machining of steel materials.
Compatible materials:
Grey Cast Iron
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

UNIMET 185

Water-miscible metalworking fluids
UNIMET 185 is a bactericide-free, robust and economical cooling lubricant for light to medium machining of steel materials.
Compatible materials:
Grey Cast Iron
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

UNIMET 229

Water-miscible metalworking fluids
UNIMET 229 is a particularly efficient product that can be used for a large variety of machining applications on steel, cast iron and other materials.
Compatible materials:
Grey Cast Iron
Steel
Applications:
Drilling
Turning
Milling
Tapping
Grinding
Learn more

UNIMET 275

Water-miscible metalworking fluids
UNIMET 275 is a boron free product for a large variety of machining applications and materials including steel and cast iron. The product features a stable formulation and excellent flushing and washing characteristics.
Compatible materials:
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

UNIMET 300 FE

Water-miscible metalworking fluids
UNIMET 300 FE specially developed for machining cast iron and ferrous materials.
Compatible materials:
Grey Cast Iron
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

UNIMET AS 194

Water-miscible metalworking fluids
UNIMET AS 194 is a particularly efficient product that can be used for a large variety of machining applications and materials including steel and cast iron.
Compatible materials:
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Reaming
Grinding
Learn more

UNIMET AS 198

Water-miscible metalworking fluids
UNIMET AS 198 is a particularly efficient product that can be used for a large variety of machining applications and materials.
Compatible materials:
Grey Cast Iron
Hard Metals
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Grinding
Learn more

UNIMET AS 260

Water-miscible metalworking fluids
UNIMET AS 260 is a particularly efficient product that can be used for a large variety of machining applications and materials including steel and cast iron.
Compatible materials:
Grey Cast Iron
Steel
Applications:
Drilling
Milling
Grinding
Learn more

How can we help you?

If you’re interested in our products and services or have any questions or suggestions, please don’t hesitate to contact us.

Oemeta (UK) Limited

Bramley House
39 Main Road
Middleton Cheney
OX17 2ND
United Kingdom